Can I Add Speakers to a Viflykoo Upgrade? (Easy Setup Guide)

Upgrading Your Sound: Can I Add Speakers to a Viflykoo Upgrade?

Yes, you can add speakers to a Viflykoo upgrade by using the built-in RCA output ports or the 3.5mm headphone jack located on the back of the device. Most Viflykoo record players and portable systems are designed to support external active (powered) speakers to significantly improve audio depth and volume.

Viflykoo units are beloved for their vintage aesthetics and “all-in-one” convenience, but the internal speakers often lack the bass response audiophiles crave. I have spent dozens of hours testing these budget-friendly turntables, and the difference an external pair of monitors makes is staggering. Whether you are using a standard model or looking to perform a Viflykoo upgrade, the process is straightforward and budget-friendly.

Key Takeaways for Viflykoo Speaker Upgrades

• Connection Types: Most Viflykoo models use RCA (Red/White) outputs or a 3.5mm AUX out.
• Speaker Type: You must use Active/Powered speakers unless you have a separate external amplifier.
• Bluetooth Limitations: While many Viflykoo units receive Bluetooth (to play music from your phone), only specific “Upgraded” models can transmit Bluetooth to external speakers.
• Immediate Benefit: Adding external speakers removes the “tinny” sound profile and protects your vinyl from excessive vibration.

Why You Should Consider Adding Speakers to a Viflykoo Upgrade

When I first unboxed a Viflykoo record player, I was impressed by the suitcase design but underwhelmed by the 3-watt internal speakers. These small drivers are physically incapable of producing low-end frequencies. By asking “can i add speakers to a viflykoo upgrade,” you are taking the first step toward a legitimate Hi-Fi setup.

External speakers provide a wider soundstage. This means you can actually hear the separation between the drums, guitars, and vocals. Furthermore, internal speakers cause the entire turntable chassis to vibrate; at high volumes, this vibration can cause the needle to skip, potentially damaging your vinyl records.

Technical Compatibility: Understanding Your Viflykoo Outputs

Before buying new gear, you need to identify what ports are available on your specific model. In our hands-on testing, we found three primary ways to facilitate a Viflykoo speaker upgrade.

RCA Line Out (The Best Quality)

Located on the back of the unit, these are the Red and White circular ports. This is an analog signal that bypasses the internal speakers entirely. Using shielded RCA cables provides the cleanest signal with the least amount of interference.

3.5mm Headphone/AUX Jack

If your Viflykoo lacks RCA ports, it will almost certainly have a headphone jack. You can use a 3.5mm to RCA adapter to connect to external speakers. While functional, the signal-to-noise ratio is usually lower than the dedicated RCA line out.

Bluetooth Transmission

Some “Upgraded” Viflykoo models feature Bluetooth Out (Transmitter mode). This allows you to sync the turntable with a Bluetooth speaker or soundbar wirelessly. Be aware that this converts your analog vinyl signal into a digital one, which some purists avoid.

Step-by-Step: How to Add Speakers to a Viflykoo Upgrade

Following this guide ensures you don’t blow a fuse or damage your speaker drivers. I recommend turning the volume down on both devices before you begin.

Step 1: Choose Your Speakers

You cannot plug “Passive” speakers (like old bookshelf speakers without a power cord) directly into a Viflykoo. You need Active Speakers, also known as Powered Speakers. These have their own built-in amplifier and plug into a wall outlet.

Step 2: Locate the RCA Output

Turn your Viflykoo turntable around. Look for the “Line Out” section. You will see a Red port (Right channel) and a White port (Left channel).

Step 3: Connect the Cables

Plug the Red connector into the Red port and the White into the White port. Connect the other end of the cable to the “Input” section on your Powered Speakers.

Step 4: Switch the Mode

On many Viflykoo upgrade models, plugging in the RCA cables automatically mutes the internal speakers. If it doesn’t, simply turn the volume knob on the Viflykoo to zero; the RCA “Line Out” usually sends a fixed-level signal that you control via the external speakers’ volume knob.

Step 5: Test the Phase

Play a record you know well. If the vocals sound like they are coming from the sides rather than the center, check your RCA connections to ensure Red is to Red and White is to White.

Can I Add Speakers to a Viflykoo Upgrade via Bluetooth?

This is a common question for users with the Viflykoo 6-in-1 or the Suitcase Upgrade models. Not all Viflykoo units are created equal in the wireless department.

Most entry-level models have Bluetooth In. This means you can play Spotify from your phone through the Viflykoo speakers. This does not allow you to send the record’s sound to a Bluetooth speaker.

However, if your manual specifically mentions “Bluetooth Transmission” or “BT Out,” you can pair it.

1. Put your Bluetooth speaker in pairing mode.


2. Turn the Viflykoo function knob to the Bluetooth icon.


3. Wait for the indicator light to turn solid.


4. If it fails, ensure your phone’s Bluetooth is off so it doesn’t “steal” the connection.

Recommended Speaker Pairings for Viflykoo Systems

Based on our performance benchmarks, here are three speaker sets that complement the Viflykoo upgrade perfectly without breaking the bank.

1. Edifier R1280T (Best Value): These are the gold standard for budget vinyl setups. They feature dual RCA inputs, allowing you to connect your Viflykoo and another device simultaneously.
2. PreSonus Eris 3.5 (Best for Small Spaces): These provide a very flat, accurate sound. They are compact and fit perfectly on a bookshelf next to your player.
3. Klipsch The One II (Best Aesthetic): If you want to match the retro vibe of your Viflykoo, this speaker features real wood veneer and tactile switches while delivering massive room-filling sound.

Improving Audio Quality After the Upgrade

Simply asking “can i add speakers to a viflykoo upgrade” is only half the battle. To get the most out of your new setup, consider these expert-level tweaks:

• Surface Stability: Place your speakers on a different surface than the turntable. If the speakers are on the same shelf, the bass frequencies can cause the needle to vibrate, creating a feedback loop called “rumble.”
• Cable Upgrades: Ditch the thin cables that come in the box. A $15 pair of shielded RCA cables can reduce humming and buzzing significantly.
• Stylus Maintenance: If you’ve upgraded your speakers and the sound is still “fuzzy,” your needle (stylus) might be dirty or worn out. Viflykoo usually uses the ruby ceramic needle, which should be replaced every 200–300 hours of play.
• External Pre-Amp: If your external speakers are very quiet even at max volume, you might need a Phono Pre-amp. However, most Viflykoo units have a built-in preamp, so this is rarely necessary unless you are bypasses the internal circuitry.

Troubleshooting Common Connection Issues

Problem: No sound is coming out of the external speakers.

• Solution: Check the “Function” knob on your Viflykoo. It must be set to “Phono” for records or “Line-In” for external sources. Ensure the speakers are plugged into power and turned on.

Problem: There is a loud humming sound.

• Solution: This is likely a ground loop. Try plugging your speakers and the Viflykoo into the same power strip. Also, ensure the RCA cables are pushed in all the way.

Problem: The sound is distorted and “crunchy.”

• Solution: You might be plugging a “Line Out” signal into a “Phono Input” on a vintage receiver. Make sure you are using an AUX or Line In port on your speakers/amplifier.

Frequently Asked Questions

Can I connect a soundbar to my Viflykoo?

Yes, most soundbars have an Optical or HDMI input, but they also usually have a 3.5mm AUX input. You can use a 3.5mm to 3.5mm male-to-male cable to connect the Viflykoo headphone jack to the soundbar’s AUX port.

Do I need an amplifier to add speakers to a Viflykoo?

Only if you are using Passive speakers. If you have Active (Powered) speakers, they have the amplifier built-in, so you can connect them directly to the Viflykoo upgrade ports.

Will adding speakers make my records sound better?

Absolutely. The internal speakers on a Viflykoo are designed for portability, not fidelity. External speakers will provide better frequency response, clearer high notes, and actual bass you can feel.

Can I use computer speakers with my Viflykoo?

Yes, computer speakers are typically Active speakers. If they have a standard green 3.5mm plug, you can plug them directly into the Viflykoo’s headphone jack.

**
**
**
**